Certifications and approvals - Underwriters Lab, Canadian Standards Association, Restriction of Hazardous Substances, and Mil Spec approvals

EPDM Cold Shrink Specs

GAMMA'S  Cold Shrink EDL Series Kits

Gamma's EDL series of cold shrink kits are a safe, easy and reliable method to seal coaxial connections. EDL is ideal for wireless communication towers and any other exposed coax interface. These kits are applied without flame and installed without tools. Simply pull the rip cord and the tube shrinks down around your connection. Foam strips are supplied for use on connectors with particularly small outer diameters. Once installed, the connection is weather proof and protected against dust or dirt that may find it's way into your connection.

Feeder Cable

    1/4" 3/8" 1/2" 5/8" 7/8" 1 1/4" 1 5/8" 2 1/4"  
Jumper cable 1/4"                  
3/8"     EDL-1   EDL-2    
1/2"                 EDL-4
5/8"               EDL-3  
7/8"           w/o foam > 7/8" w/o foam  
1 1/4"             > 7/8" EDL-2
1 5/8"                 EDL-3
2 1/4"                 EDL-3

 

Specifications

Gamma Cold Shrink Kit contains EPDM rubber sleeves that are applied without a heat gun or flame. Foam strips serve as a dimensional spacer between smaller coax cables and the minimum sealing diameter of the cold shrink.It's compatible with the coax cables and N or 7/16 DIN connectors. ts an open-ended, I tubular rubber sleeves,which are factory expanded and assembled onto a removable core.They are given for field installation in the pre-stretched condition.

 

Features

  • Simple installation, requires only workman's hands
  • Accommodates a wide range of cable
  • No torches or heat required
  • Good thermal stability
  • Seals tight, retains its resiliency and pressure even after proplonged years of ageing and exposure.
  • Excellent wet electrical properties
  • Improved tough rubber formulation to with stand rough backfilling
  • Waterproof
  • Resist fungus
  • Resists acids and alkalis
  • Resists ozone and ultrviolet light
Technical Data Results
100% Modulus ASTM D 412 1.17 Mpa
300% Modulus ASTM D 412-75 4.7 Mpa
Ultimate Tensile ASTM D 412-750 riginnal 11.6 Mpa
Ultimate Elongation ASTM D 412-750 riginal 635%
Dielectric Strengh ASTM D 149-750 riginal @ 1.78mm 19.1 MV/m
7 Days in H2O at 90°C 18.1MV/m
Dielectric Constant Original 5
7 Days  90°C (H2O) 5.6

 

 

Ordering Specifications
Gamma    Part Number  Sealing Application Sizes    for DIN or Type N Coax Cable Connectors
EDL-1 Black Cold Shrink    Weatherproofing Kit 1/4" - 7/8" Cable to 1/4" - 7/8"    Cable  
EDL-2 Black Cold Shrink    Weatherproofing Kit 1/4" - 1 5/8" Cable to 1/4" - 1 5//8"    Cable  
EDL-3 Black Cold Shrink Weatherproofing Kit 1/4" - 2 1/4" Cable to 1 1/4" - 2 1/4" Cable
EDL-4 Black Cold Shrink    Weatherproofing Kit 1/4" - 7/8" Cable to antenna or Surge Arrestor


Please contact us for price and availability. sales@gammaelectronics.net

Click here for EDL Specs

Click Here for EDL-1A Sealing Kit Instructions

 

*RoHS : compliant with EU RoHS Directive (2005/95/EC) “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents GAMMA'S knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to GAMMA.

Intellectual Property of Gamma Electronics Inc.
www.gammaelectronics.net
Phone: 1-909-860-1479
Fax: 1-909-839-4461
sales@gammaelectronics.net