Certifications and approvals - Underwriters Lab, Canadian Standards Association, Restriction of Hazardous Substances, and Mil Spec approvals

Military Grade / MIL-SPEC Polyolefin 2:1 Shrink Tube Clear M23053/5-201-C

Military Grade / MIL-SPEC Polyolefin 2:1 Shrink Tube Clear M23053/5-201-C

Size
-
3/64 in.
Spool Size
-
1000 ft.
Color
-
Clear

Availability: Verify Availability Before Ordering

Description

Details

Gamma’s Thin wall Polyolefin Heat Shrinkable Tube is used for insulation, strain relief, and abrasion protection on cable harnesses and wire bundles in military and aerospace industries. MilSpec Shrink Tubing provides fluid and solvent resistance, including lubricating oil, aviation and ground-vehicle fuels and hydraulic fluids. Polyolefin tube remains flexible at low temperatures.

  • The shrinkable tube M23053/5-201-C supplied Inside Diameter is 0.046 inch (1.17 mm). After Unrestricted shrinkage, the Inside Diameter is maximum of 0.023 inch (0.58 mm).
  • After heating, the Wall Thickness for this heat shrinkable tube will be 0.016 ± 0.003 inch (0.406 ± 0.076 mm).
  • Continuous operating temperature range of -55°C (-67°F) to +135°C (+275°F)
  • After Unrestricted Shrinkage, Maximum Dielectric constant is 2.7 and Maximum Specific Gravity is 1.00
  • Longitudinal change ± 5 percent
  • M23053/5-201-C is Clear Heat Shrink Tubing
  • M23053/5-201-C is a Flammable Class 2 Heat Shrink Tube

Key Features

Key Features

Polyolefin Heat Shrink Tube M23053/5-201-C Features

  • SHRINK RATIO 2:1
  • SAE-AMS-DTL-23053/5 CLASS 2 (Clear)
  • RoHS UL CERTIFIED E306685
  • cUL CERTIFIED
  • Concentricity as supplied is 70% minimum (50% minimum for over expanded sizes)
  • Maximum Secant Modules is 25000 psi (172.4 MPa)
  • Excellent general purpose and highly flexible insulation
  • Environmentally Friendly
  • Shrink Temperature: 90º - 100º Celcius

M23053/5-201-C Heat shrinkable flexible polyolefin sleeving is used for light duty harness jackets, wire color coding, marking or identification.

Specification

Specification

Military Grade / MIL-SPEC Polyolefin 2:1 Thin Wall Shrink Tube M23053/5-201-C Specification

Part No Minimum Inside Diameter as Supplied Maximum Inside Diameter After Heating Wall Thickness After Heating
  Mm Inch Mm Inch Mm Inch
M23053/5-201-C  1.17 0.046 0.58 0.023 0.406 ± .076 0.016 ± .003
M23053/5-202-C  1.60 0.063 0.79 0.031 0.432 ± .076 0.017 ± .003
M23053/5-203-C  2.36 0.093 1.17 0.046 0.508 ± .076 0.020 ± .003
M23053/5-204-C  3.18 0.125 1.58 0.062 0.508 ± .076 0.020 ± .003
M23053/5-205-C  4.75 0.187 2.36 0.093 0.508 ± .076 0.020 ± .003
M23053/5-206-C  6.35 0.250 3.18 0.125 0.635 ± .076 0.025 ± .003
M23053/5-207-C  9.53 0.375 4.75 0.187 0.635 ± .076 0.025 ± .003
M23053/5-208-C  12.7 0.500 6.35 0.250 0.635 ± .076 0.025 ± .003
M23053/5-209-C  19.1 0.750 9.53 0.375 0.762 ± .076 0.030 ± .003
M23053/5-210-C  25.4 1.000 12.7 0.500 0.889 ± .127 0.035 ± .005
M23053/5-211-C  38.1 1.500 19.1 0.750 1.016 ± .152 0.040 ± .006
M23053/5-212-C  50.8 2.000 25.4 1.000 1.143 ± .178 0.045 ± .007
M23053/5-213-C  76.2 3.000 38.1 1.500 1.270 ± .203 0.050 ± .008
M23053/5-214-C  101.6 4.000 50.8 2.000 1.397 ± .229 0.055 ± .009

Properties

Properties

Characteristic Requirement Test procedure and condition
As supplied:    
Heat shock No cracks, flowing or dripping 250° ± 3°C (482° ± 6°F)
Secant modulus, psi (MPa), max 25,000 (172.4) percent strain, ASTM D882
Concentricity 70% minimum (50% minimum for
over expanded sizes)
 
Color stability Pass 175° ± 2°C (347° ± 4°F), 24 hours
Clarity stability Clear Pass 175° ± 2°C (347° ± 4°F), 24 hours
Restricted shrinkage No cracks 175° ± 2°C (347° ± 4°F)
Voltage withstand Pass  
After unrestricted shrinkage:    
Tensile strength, psi (MPa), minimum 1,500 (10.3) ASTM D638, 20 inches/minute
Ultimate elongation, percent, minimum 200 ASTM D638, 20 inches/minute
Dielectric strength, Volts/roil (Kv/mm),
minimum
500 (19.7) ASTM D2671
Volume resistivity, Ohm-cm, minimum 10^14 ASTM D876
Dielectric constant, maximum 3/ 2.7 ASTM D150
Specific gravity, maximum 1.00 ASTM D792
Water absorption, percent, maximum 0.5 ASTM D570, 24 hrs. at 23°C
Corrosion No corrosion 175° ± 2°C (347° ± 4°F), 16 hours
Low temperature flexibility No cracking -55° ± 1°C (-67° + 2°F)
Flammability N/A  
Heat resistance, property after:   for 168 hours, 175° ± 2°C (347° ± 4°F)
Ultimate elongation, percent, minimum 100  
Fluid resistance, property after:    
Tensile strength, psi (MPa), minimum 1,000 (6.9)  
Dielectric strength volt/roil (Kv/mm),
minimum
400 (15.8)  
Fungus resistance 2 No growth ASTM G21