< Back to Heat Shrink Tubing Page
EPDM Heat Shrinkable Tube
EPDM is a specially formulated elastomeric heat shrinkable tube designed for high temperature environments. EPDM is a synthetic rubber with a higher shrink ratio than heat shrinkable silicone, which allows for coverage on different materials. Even though this product is not quite as flexible as heat shrinkable silicone, it works well when shrinking around preformed permanent substrates. This product provides resistance to unwanted tackiness and flow when recovering.
SHRINK RATIO 2:1 – FLAME RETARDANT – RoHS COMPLIANT – HIGHLY FLEXIBLE
- Suitable for jacketing and protection to cables, pipes, and connectors
- Used for protecting solder joints, wires, cables, terminals, connectors and various electronic apparatus
- Operating Temperature: -55 degrees to 150 degrees Celsius
- Minimum Full Recovery Shrink Temperature: 135 degrees Celsius
- Flame Retardant
- Shrink Ratio: 2:1
- Environmentally Friendly
- Packaging: Available from 1/8” ID to 2.75” ID before Recovery
Gamma Part No. W/ Size | Minimum Expanded as Supplied | Maximum Recovered After Heating | Recovered Thickness After Heating | Standard Packaging Spool | |
mm | inch | mm | mm | ||
EPDM-1/8 | 3.2 | 0.125 | 1.6 | 0.76 | 500’ |
EPDM-3/16 | 4.8 | 0.1187 | 2.4 | 0.85 | 500’ |
EPDM-1/4 | 6.4 | 0.25 | 3.2 | 0.90 | 200’ |
EPDM-3/8 | 9.5 | 0.375 | 4.8 | 1.02 | 200’ |
EPDM-1/2 | 12.7 | 0.5 | 6.4 | 1.22 | 200’ |
EPDM-3/4 | 19.1 | 0.75 | 9.5 | 1.45 | 100’ |
EPDM-1 | 25.4 | 0.1 | 12.7 | 1.8 | 100’ |
EPDM-1/1/2 | 38.1 | 0.15 | 19.1 | 2.4 | 50’ |
EPDM-2 | 50.8 | 2.0 | 25.4 | 2.8 | 50’ |
EPDM-2.75 | 70 | 2.75 | 35 | 3.2 | 50’ |
- Product is only available in black.
- P/N Example: EPDM-1/4-0 = Black ¼” Tubing