SDL-1A-125

SDL-134-50-CLR Cold Shrink

Clear SDL Cold Shrink Tubing

SDL-134-50-CLR
SDL-134-50-CLR
SDL-134-50-CLR
Cold Shrink on 10 AWG Wire
What is Cold Shrink?
How to Install Cold Shrink on a RF Cable
previous arrow
next arrow
SDL-134-50-CLR
SDL-134-50-CLR
SDL-134-50-CLR
Cold Shrink on 10 AWG Wire
What is Cold Shrink?
How to Install Cold Shrink on a RF Cable
previous arrow
next arrow

$9.38 Before Tax

Only 1 left in stock

An AT&T approved product, (CEQ. 54057).

Part Number: SDL-134-50-CLR

Only sold in quantities of 25

Gamma’s Clear SDL Cold Shrink Tubing is a specially formulated, pre-expanded transparent silicone rubber shrink tubing that does not require heat to shrink. It is intended for weatherproofing of AC & DC electrical power wire/lug assemblies. This transparent silicone rubber allows the integrity of the waterproof seal on the wire/lug interface to be easily ascertained by visual inspection.

Gamma’s Clear SDL Cold Cold Shrink Tubing has incredible weather protection capabilities while also being amazingly easy to install. Cold Shrink Tubing also has the added benefit of protecting the wire/lug interface from loosening over time due to vibration.

Additional information

Weight1 lbs
Dimensions8 × 6 × 6 in
Model

SDL-134-50-CLR

SKU: SDL-134-50-CLR Categories: , ,
AT&T Approved Products
Cold Shrink Sizing Guide

Part Number

Typical Application

Pre-Shrink ID

Shrunk ID

Length (mm/inches)

SDL-134-50-CLR

8-10 AWG Wires

13mm

4mm/0.157"

50mm/1.969"

SDL-245-65-CLR

2-6 AWG Wires

24mm

5mm/0.197"

65mm/2.559"

Posts About Cold Shrink

Gamma Cold shrink Frequently Asked Questions
Why Gamma Electronics cold shrink is the best cable protection