SDL-245-65-CLR Cold Shrink
Clear SDL Cold Shrink Tubing
$10.12 Before Tax
Only 79 left in stock
An AT&T approved product, (CEQ. 54058)
Part Number: SDL-245-65-CLR-50
Only sold in quantities of 25
Gamma’s Clear SDL Cold Shrink Tubing is a specially formulated, pre-expanded transparent silicone rubber shrink tubing that does not require heat to shrink. It is intended for weatherproofing of AC & DC electrical power wire/lug assemblies. This transparent silicone rubber allows the integrity of the waterproof seal on the wire/lug interface to be easily ascertained by visual inspection.
Gamma’s Clear SDL Cold Cold Shrink Tubing has incredible weather protection capabilities while also being amazingly easy to install. Cold Shrink Tubing also has the added benefit of protecting the wire/lug interface from loosening over time due to vibration.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 6 in |
| Model | SDL-245-65-CLR |
Cold Shrink Sizing Guide
Part Number | Typical Application | Pre-Shrink ID | Shrunk ID | Length (mm/inches) |
SDL-134-50-CLR | 8-10 AWG Wires | 13mm | 4mm/0.157" | 50mm/1.969" |
SDL-245-65-CLR | 2-6 AWG Wires | 24mm | 5mm/0.197" | 65mm/2.559" |
Posts About Cold Shrink
