< Back to Cable Protection
EPDM Cold Shrink
Gamma’s EPDM cold shrink is specially formulated pre expanded rubber shrink tube that does not require heat to shrink. It is supplied expanded over an easily removable plastic cylinder. When the plastic cord is pulled, it allows the rubber sleeve to shrink and rapidly seal and protect the connector, while gripping tight around the cable. EPDM cold shrink is a safe, easy and reliable method to seal coaxial connections.
EPDM cold shrink is ideal for wireless communication towers and any other exposed coax interface. Once installed correctly, the connection is weather proof and protected against dust or dirt that may find its way into your connection.
- Simple installation, requires only workman’s hands
- No torch or heat source required for installation
- Good thermal stability
- Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
- Waterproof
- Resisting to fungus, acids, alkalis, ozone and ultraviolet light
- Accommodates a wide range of cables
- Excellent wet electrical properties
Gamma’s EPDM Cold Shrink sleeves are applied without a heat gun or flame. It’s compatible with coax cables and N or 7/16 DIN connectors. Cold shrink sleeves are pre-stretched and assembled onto a removable core.
General EPDM
| Part Number | Size | Before Recovery (mm) | After Recovery (mm) | Color |
| EPDM-8320-6 | Ø 20 | 8-15 | 152 | Black |
| EPDM-8325-L | Ø 25 | 10-20 | 203-280 | Black |
| EPDM-8335-L | Ø 35 | 14-30 | 229-280 | Black |
| EPDM-8340-L | Ø 40 | 17.5-33 | 152-457 | Black |
| EPDM-8353-L | Ø 53 | 25-46 | 152-457 | Black |
| EPDM-8370-L | Ø 70 | 32-63 | 152-457 | Black |
| EPDM-8104-9 | Ø 104 | 43-94 | 229 | Black |
High Shrinkage EPDM
| Part Number | Size | Before Recovery (mm) | After Recovery (mm) | Color |
| EPDM-8435-L | Ø 35 | 12.5-30 | 229-279 | Black |
| EPDM-8440-L | Ø 40 | 14-33 | 152-406 | Black |
| EPDM-8453-L | Ø 53 | 19-46 | 152-457 | Black |
| EPDM-8360-L | Ø 60 | 20.5-51 | 254 | Black |
| EPDM-8470-L | Ø 70 | 25-63 | 152-457 | Black |
| EPDM-8480-13 | Ø 80 | 27.4-70 | 325 | Black |
RoHS : compliant with EU RoHS Directive (2005/95/EC)
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents GAMMA’S knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to GAMMA.
Buy Direct
To purchase, call (909) 867-1479 to speak to a Gamma Sales Representative, or email us at Sales@GammaElectronics.net.
You can also Contact Us about purchasing by clicking on the button below.
Articles Related to EPDM Cold Shrink
