< Back to Cable Protection
WSCES Cold Shrink End Caps
Gamma’s Cold Shrink End Caps protect your cable ends from exposure to moisture, contamination and corrosion. To install, these pre-stretched rubber sleeves are positioned over the end of a cable and the core is removed to provide a reliable seal. No tools are needed to install, and these end caps can be removed without damage to the cable.
- Made of EPDM rubber
- Easy and fast installation
- Can meet a variety of configuration requirements
- Provides sealing protection over multi-core cable ends
- Simple and fast installation, no tools required.
- Accommodating size ranges from 13mm to 70mm
- Sealing tight, high rebound even after
- prolonged years of aging and exposure.
- Water-resistant.
- No mastic or tape required.
- No torches or heat required.
- Resists fungus.
- Resists acids and alkalis.
- Resists ozone.
- Easily removed.
- No training required for installation.
| Property | Test Method | Standard Value |
| 300% Modulus | ASTM D-412-75 | 4.2MPa |
| Ultimate Tensile | ASTM D-412-75 | 10.05MPa |
| Ultimate Elongation | ASTM D-412-75 | 600% |
| Tear strength | ASTM D-624C-73 | 28.3KN/m |
| Fungus Resistance | ASTM G-21 | 28 days exposure No Growth |
| Moisture Absorption 7 days at 90°C in H2O | 3.0% wt. Gain |
| Gamma P/N | ID as Supplied (Min)/mm | ID after Recovered (Max)/mm | Wall Thickness after Recovered (Nom)/mm | Wall Thickness Application Range/mm | Length/mm (±10%) |
| EDL-CP1-20/12-0 | Ø20 | Ø12 | 2.5 | Ø13-Ø16 | 70 |
| EDL-CP2-28/16-0 | Ø28 | Ø16 | 2.5 | Ø18-Ø24 | 70 |
| EDL-CP3-47/23-0 | Ø47 | Ø23 | 2.6 | Ø25-Ø28 | 70 |
| EDL-CP4-80/46-0 | Ø80 | Ø46 | 2.6 | Ø48-Ø70 | 70 |