Tower Utility Knife
Remove Cold Shrink while Not Damaging Cables
$88.96 Before Tax
Remove cold shrink in less than a minute without damaging the cable or connector. Removal of cold shrink tubing with a conventional straight razor or hooked blade can damage the cable sheath and poses a risk of injury to the operator. Gamma’s Tower Utility Knife has a secured blade which protects the cable from cuts and nicks.
The TUK-1 incorporates a rotatable blade with two separate cutting edges, one straight and one curved to a point. The blade is mounted to a lever-shaped handle and the straight cutting edge is located inside of a blade guard that can be slid between the cold shrink tubing and the cable so that a cut can be made without damage to the cable sheath. This edge is straight so that it can be easily sharpened with commonly available blade sharpeners.
|Dimensions||8 × 4 × 10 in|